×

Our specialists will reach out shortly.

TOC Analyzer FM-TOC-A100

TOC Analyzer FM-TOC-A100

TOC Analyzer FM-TOC-A100 is used to determine TOC (Total Organic Carbon Content) present in liquid or gas samples through “Wet Chemical Oxidation Method”. Nitrogen (N2) gas, Non-dispersive infrared (NDIR) detector are used for determination of carbon in the range of 0 to 10000 mg/l. This TOC analyzer offers 24 bits data solution extended monitoring range, controlling system with 32bin processing technology significantly improves performance.

Specifications

Measurement Range 0-10000 mg/l
Detection Limit 5 μg/l (ppb)
Digestion Mode Wet chemical Oxidation by UV
Detector NDIR
Parameters TC, TIC, TOC, NPOC
Sample type Liquid Sample
Gas Requirement Nitrogen ≥ 99.995%
Repeatability  3 %
Maximum Salinity  85 g/l
Operation Mode PC Control
Power AC 220 ± 10 V,50/60 Hz, 1 kW
Dimension  430 × 455 × 440 mm
Weight 45 kg

Features

  • Measures TOC, TIC, TC, NPOC parameters using NDIR detector
  • Digestion mode: Wet Chemical Oxidation Method
  • Signal management system: Online setting, real-time monitoring, self-testing and flow speed control for high performance and safe operation
  • Different temperature setting: To ensure complete sample digestion, obtain more accurate data
  • Weak current system ensures operational user safety
  • Adjustable cooling module power as per sampling volume: To ensure the dry gas in detector advance drying performance
  • Automatic leak check system: To evade any operational mistakes, improves performance of the analyzer
  • Flow rate controlling system: To eliminate any error caused by flow rate fluctuation for data accuracy

Applications

  • TOC analyzer finds applications in QC (quality control) testing of drinking water, waste and sewage water, industrial water. Also used in validation of water required in pharmaceuticals procedures.

Autosampler Optional

  • Features:
    • → Auto-sampler processor monitors the components motion state continuously during the injection
    • → Injector interface: Auto-sampler power switch, power interface, USB communication interface and control panel cover
    • → Replaceable sample injecting needle
    • → 19 different samples can be tested using PC software
    Specification:
    Injecting arm stroke 85 mm
    Maximum number of samples 19
    Ambient temperature 0 to 40°C
    Relative humidity ≤ 85%
    Power 120 W
    Power supply 100 to 240 V , 50/60 Hz
    Dimension 280 × 385 × 390 mm

Alternative Models Of TOC analyzers

Our TOC Analyzers are important tools for measuring total organic carbon levels in water. They provide accurate and reliable results across a variety of uses. Commonly used in industries like pharmaceuticals, electronics, food, and environmental testing, these analyzers are designed for both offline and online monitoring.

TOC Analyzer FM-TOC-B100

  • Type: Offline
  • Measurement range: 0.001 to 1.5 mg/L (ppm)
  • Detection limit: 1 ppb
Catalog

TOC Analyzer FM-TOC-B101

  • Measuring range: 0.001 to 1.5 mg/l
  • Limit of detection: 0.001 mg / l
  • Maximum Tolerance: ± 5 %
Catalog

TOC Analyzer FM-TOC-A101

  • Measurement range: 0 to 30000 mg/l ( ppm )
  • Detection limit: 50 μg/l ( ppb)
  • Digestion method: High-temperature combustion
Catalog
TOC Analyzer FM-TOC-B102
  • Type: Offline
  • Measurement range: 0.001 mg/ L to 1 mg / L ( 1 to 1000ppb )
  • Detection limit: 0.055 μs /cm to 8.000 μs/cm
Catalog
TOC Analyzer FM-TOC-B103
  • Measurement range: 0 to 1000 mg / l , can extend to 0 to 100 , 000 mg / L ( Automatic dilution )
  • Detection limit: IC: 20 μg / L
  • Detection method: High-Temperature Catalytic Combustion
Catalog

Auto Sampler for TOC Analyzer FM-AS-A100

  • Type of specimen: Solid or Suspension liquid sample
  • Range of measurement: 0.1 to 30.0 mg
  • Control Mode: PC software controlled
Catalog