Gas Chromatography-Mass Spectrometry FM-GCMS-A100

Gas Chromatography-Mass Spectrometry FM-GCMS-A100

Gas Chromatography-Mass Spectrometry FM-GCMS-A100 supports an inlet temperature of up to 450°C, enabling a wide range of compound analysis. This is equipped with a turbo molecular pump, which maintains a stable vacuum environment essential for accurate analysis. Its column oven can achieve heating rates up to 120°C/min, facilitating faster analyses. Our GC-MS includes a dynode electron multiplier for superior sensitivity and detection of analytes.

  •  Versatile split injection modes
  •  Integrated data processing system
  •  Automated compound identification
  •  High-speed scanning capability
  •  Enhanced ion source efficiency

Inlet Temperature Max. 450°C
Pressure Range 0 to 100 psi (±0.002 psi)
Pressure Control Mode Electronic Pressure Control (EPC), supports Constant Volume (CV) and Constant Current (CC)
Split Mode Split/Splitless, max. split ratio: 1000:1
Column Oven Temperature Room temperature + 4°C to 450°C
Heating Rate Up to 120°C/min
Temperature Programming 7 stages / 8 platforms
Auto Sampler Optional
EI Source Ionization Energy Adjustable from 5 eV to 250 eV
Mass Range 1.5 to 1000 amu
Resolution Unit resolution (full width at half maximum)
Ion Source Temperature 100 to 350°C
Filament Emission Current 0 to 350 μA
GC-MS Temperature Interface Max. 450°C
Stability ±0.10 amu over 48 hours
Sensitivity Full scan, 1 pg OFN at m/z 272 with S/N ≥ 30:1 (RMS)
Scan Rate Up to 10,000 amu/s
Vacuum Turbo molecular pump (67 L/s)
Detector High-energy dynode electron multiplier
Power Consumption 3000W
Dimensions (L×H×W) 500 ×480 ×1200 mm
Weight 200kg

Gas Chromatography-Mass Spectrometry FM-GCMS-A100 is widely used in environmental monitoring, food safety, petrochemical analysis, and pharmaceutical research. It is essential for detecting pollutants, analyzing additives, and identifying trace compounds in various industries.

Name Quantity
Mechanical Pump 1 Pc
GC-MS Column 1 Pc
Network Cable 1 Pc
Series Port Cable 1 Pc
Power cable 5 Pcs
Corrugated pipe 1 Meter
Clamp hoop 2 Pcs
Seal ring 2 Pcs
Wrench - 5.5mm, 7mm 1 Pc
Wrench-10mm, 12mm 1 Pc
Wrench -8mm, 10mm 1 Pc
Tweezers 1 Pc
Cross Screwdriver - Ф6×120,ph2 1 Pc
Cross Screwdriver- Ф2×50,ph1 1 Pc
Straight Screwdriver 1 Pc
Monkey Wrench 1 Pc
Allen Wrench 1 Pc
Sleeve 1 Pc
15% Graphite /85% Vespel Ferrule 10 Pcs
Syringe 1 Pc
Column Cutter 1 Pc
Liner 1 Pc
Fuse 2 Pcs
Plastic Corrugated pipe 1.5 Meter
Sylphon Bellows Connector 1 Pc
Hose clamp 1 Pc
Ion Source Holder 1 Pc
Column measuring tool 1 Pc
Stainless Steel Tube 7 Meter
1/8"Ferrule 1 Pc
Valve Connector 2 Pcs
O-ring - 2.5×1.8 5 Pcs
O-ring - 1.8×1.8 1 Pc
O-ring 5 Pcs
Glass Wool 1 Pc
Front Ferrule 3 Pcs
Back Ferrule 3 Pcs
Injection port Wrench 1 Pc
Glass Liner 1 Pc
Moisture Trap 1 Pc
Oxygen Trap 1 Pc
Trap Bracket 1 Pc
Ribbon 8 Pcs
Injection Septum 1 Pc
Ethernet switch 1 Pc

Auto Sampler